North Ridge Pumps

Q: What factors should be considered when selecting a pump?

Flow Rate: Ensure the pump meets the required volume.Pressure: Match the pump’s head capacity to the system’s needs.Fluid Properties: Consider viscosity, abrasiveness, and corrosiveness.Certification: From ATEX or Marine Class, to 3.1 Material Certificates for ensuring complianceAPI Standards: Compliance with industry standards for longevity and safety.

SORT BY:
Default

Showing 1 - 24 of 223 products

SHOW FILTERS

Pump Type

Max Flow Rate

Max Pressure

Max Head

Pump Materials

Max Temp

Max Viscosity

Max Solid Passage

Self Priming

Drive

Brands

RESET FILTERS

CASE STUDIES

High Pressure Plunger Pump for Reverse Osmosis System On Board an Offshore Supply Vessel

03 February 2020
READ MORE
Marine Class Certified Bronze Vertical Inline Centrifugal Pump for Seawater Ballast Transfer

22 May 2020
READ MORE
Atex Triple Screw Pump for Lube Oil Recirculation

06 January 2021
READ MORE
Progressive Cavity Pump with Hydraulic Motor for Drilling Mud Recirculation

08 February 2021
READ MORE
Progressive Cavity Dosing Pumps for Multiphase Fluid Flow Experiment

20 August 2021
READ MORE

Faqs

What types of pumps are used in the oil and gas industry?

Centrifugal Pumps: Efficient for moving large volumes of low viscosity fuels, or seawater at low to medium pressure. Peristaltic Pumps: Suitable for abrasive and viscous fluids. Screw & Progressing Cavity Pumps: Ideal for high-pressure applications & challenging fluids. Gear & Diaphragm Dosing Pumps: Used for precise metering and dosing. AODD Pumps: For low pressure seawater, oil, fuel and chemical transfer.

What factors should be considered when selecting a pump?

Flow Rate: Ensure the pump meets the required volume. Pressure: Match the pump’s head capacity to the system’s needs. Fluid Properties: Consider viscosity, abrasiveness, and corrosiveness. Certification: From ATEX or Marine Class, to 3.1 Material Certificates for ensuring compliance API Standards: Compliance with industry standards for longevity and safety.

What are the typical applications of these pumps?

Oil Extraction and Processing: Handling crude oil, brine, and sand mixtures. Cooling: Seawater Cooling of Mechanical Equipment such as Generators, Turbines or Winches Chemical Injection: Precise dosing of chemicals in processing. Waste Management: Pumping sludge and wastewater.

What materials are these pumps made from?

Materials include AISI304, AISI316, duplex stainless steel, cast iron, and super duplex, designed to withstand corrosive and abrasive environments.

Why choose North Ridge Pumps for oil and gas applications?

North Ridge Pumps provide reliable, durable, ATEX and API-compliant solutions tailored to the demanding needs of the oil and gas industry. With over 100 application examples on our site, we know how to get it right.

Oil and Gas Pumps for High-Demand, Long-Life Operations

The oil and gas industry requires pumps capable of performing under the most demanding conditions, withstanding high pressures, continuous 24/7 operation, and challenging fluids like viscous oils, abrasive sands, and brine. Pumps in this sector often operate in remote locations and must meet stringent standards, such as those set by the American Petroleum Institute (API), which specify durability and a lifespan of up to 25 years. These pumps are designed for long maintenance intervals to reduce downtime, ensuring consistent performance in mission-critical applications.

Our oil and gas pump selection includes API-compliant pumps for robust handling of crude oil and multiphase pumps that simultaneously transfer oil, gas, and water from wells, streamlining processing. Centrifugal pumps are used for high-flow applications, while positive displacement pumps ensure stable flow rates and pressure in heavy-duty oil transfer processes.

These oil and gas pumps are built to last, providing reliable performance in the face of high viscosity, abrasive materials, and extreme pressures. Designed for safety and efficiency, they support critical operations in the oil and gas industry, minimising downtime and maximising productivity across extraction, processing, and transport.

Understand more about where pumps are used within the oil and gas industry.

Boxer 35 1/2" AODD

Pump Type - AODD

Max Flow Rate - 2.1M³H

Max Head - 80M

Pump Materials - PP

North Ridge 2SP Series Twin Screw Pump

Pump Type - Screw

Max Flow Rate - 1200M³H

Max Head - 400M

Pump Materials - AISI316

Boyser AMP22 Peristaltic Pumps

Pump Type - Peristaltic

Max Flow Rate - 1.2M³H

Max Head - 80M

Pump Materials - EPDM

Boyser FMP80 Peristaltic Pump

Pump Type - Peristaltic

Max Flow Rate - 42M³H

Max Head - 80M

Pump Materials - EPDM

Boyser RBT100 Peristaltic Pump

Pump Type - Peristaltic

Max Flow Rate - 72M³H

Max Head - 150M

Pump Materials - EPDM

XRHC Close Coupled Self Priming Centrifugal Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 500M³H

Max Head - 100M

Pump Materials - AISI304

XCN Close Coupled Centrifugal Pump

Pump Type - Centrifugal

Max Flow Rate - 900M³H

Max Head - 100M

Pump Materials - AISI304

XRHCE Close Coupled Self Priming Centrifugal Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 600M³H

Max Head - 100M

Pump Materials - AISI304

XHL Long Coupled Centrifugal Pump

Pump Type - Centrifugal

Max Flow Rate - 1500M³H

Max Head - 160M

Pump Materials - AISI304

XRHL Long Coupled Self Priming Centrifugal Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 1500M³H

Max Head - 160M

Pump Materials - AISI304

XRVM Vertical Self Priming Multistage Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 400M³H

Max Head - 450M

Pump Materials - AISI304

XRHLE Long Coupled Self Priming Centrifugal Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 1200M³H

Max Head - 160M

Pump Materials - AISI304

XCP Long Coupled Chemical Process Pump

Pump Type - Centrifugal

Max Flow Rate - 1500M³H

Max Head - 160M

Pump Materials - AISI304

XHLE Long Coupled Centrifugal Pump

Pump Type - Centrifugal

Max Flow Rate - 1200M³H

Max Head - 160M

Pump Materials - AISI304

XHT Long Coupled Hot Water Centrifugal Pump

Pump Type - Centrifugal

Max Flow Rate - 1500M³H

Max Head - 160M

Pump Materials - AISI304

XMZ End Suction Horizontal Centrifugal Multistage Pump

Pump Type - Multistage

Max Flow Rate - 400M³H

Max Head - 450M

Pump Materials - AISI304

XRMZ Horizontal Self Priming Multistage Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 400M³H

Max Head - 450M

Pump Materials - AISI304

XM Horizontal Centrifugal Multistage Pump

Pump Type - Multistage

Max Flow Rate - 1000M³H

Max Head - 550M

Pump Materials - AISI304

XRM Horizontal Self Priming Multistage Pump

Pump Type - Self Priming Centrifugal

Max Flow Rate - 1000M³H

Max Head - 550M

Pump Materials - AISI304

North Ridge XMMO Horizontal Multistage Multi Outlet Pump

Pump Type - Multistage

Max Flow Rate - 1000M³H

Max Head - 550M

Pump Materials - AISI304

XVM Vertical Centrifugal Multistage Pump

Pump Type - Multistage

Max Flow Rate - 400M³H

Max Head - 450M

Pump Materials - AISI304

North Ridge XVI Centrifugal Process Vertical Immersion Pump

Pump Type - Vertical Immersion

Max Flow Rate - 800M³H

Max Head - 35M

Pump Materials - AISI304

XMI Centrifugal Process Vertical Multistage Immersion Pump

Pump Type - Multistage

Max Flow Rate - 400M³H

Max Head - 220M

Pump Materials - AISI304

VXEN Vertical Inline Centrifugal Pump

Pump Type - Centrifugal, Vertical Inline Centrifugal

Max Flow Rate - 850M³H

Max Head - 100M

SORT BY:
Default

Showing 1 - 24 of 223 products

CASE STUDIES

High Pressure Plunger Pump for Reverse Osmosis System On Board an Offshore Supply Vessel

03 February 2020
READ MORE
Marine Class Certified Bronze Vertical Inline Centrifugal Pump for Seawater Ballast Transfer

22 May 2020
READ MORE
Atex Triple Screw Pump for Lube Oil Recirculation

06 January 2021
READ MORE
Progressive Cavity Pump with Hydraulic Motor for Drilling Mud Recirculation

08 February 2021
READ MORE
Progressive Cavity Dosing Pumps for Multiphase Fluid Flow Experiment

20 August 2021
READ MORE