Max Flow Rate - 7M³H
Max Head - 120M
Inlet/Outlet Sizes - 25mm to 50mm
Max Temp - 70°C
Max Viscosity - 5500 cst
Max Solid Passage - 0
Self Priming - Y
Max Suction Lift - 8M
Pump Materials - Cast Iron, Cast Steel, AISI304, AISI316
Pump Type - Gear
Drive - AC Electric, Bareshaft
MGLPR Low Pressure Modular Gear Pump with Pressure Relief Valve
Our modular gear pumps are designed to handle clean low – medium viscosity lubricating fluids, being positive displacement pump types our MGLP gear pumps are suitable for high pressure applications up to 12 bar depending on the model configuration selected and fluid being pumped. The pumping action is done by the rotation of intermeshing gears and a rotor designed to push the fluid at towards the outlet side of the pump, due to the extremely tight clearances between the gears these pumps are only suitable for lubricating clean liquids.
Some of the most common fluids our modular gear pumps are used for are fuels, oils, greases, resins and adhesives. Our modular gear pumps are manufactured according to CE standards and therefore comply with all current European quality demands and regulations, our simplistic design designed construction with only two moving/rotating components along with the exceptional tight clearance within the internal moving parts is the secret for our gear pumps high efficiency as there is almost zero slip whilst in operation as a result these pumps are also very commonly used for metering applications where an accurate flow control and measure is required. Our pump's high efficiency means their energy consumption is minimal making them consequently a great option for continuous operation, (24/7) applications.
Our modular gear pumps can be supplied with external bypass valve and external heating jacket upon request, these pumps are also available with ATEX (explosion proof) motors for hazardous non-safe environments and applications, the MGLP pump range is available with a variety of seal types such as mechanical seal, cartridge seal, packing seal and lip seals.
Thanks to having various construction materials along with a range of pump sizes, different sealing options and their 12 bar max. operating pressure our modular gear pumps can be used for a wide range of applications and almost any low-medium viscosity, non-abrasive, lubricating clean fluid specifically where a non-pulsating flow is necessary, these pumps can also be supplied with marine class certification upon request hence are perfectly suitable for marine use.
Available with several sealing options – cartridge seal, packing, single mechanical seal, lip seal etc.
ATEX certified upon request
High Efficiency due to exceptional tight clearances
Fantastic self-priming capabilities
Max. fluid operating temperature up to 70 °C
Optional external heating jacket
Manufactured according to CE standards
Medium pressure modular gear pump (Up to 12 bar)
Available with external bypass valve and heating jacket upon request
Marine class certification upon request
• Diesel fuel
• Hot oil
• Edible oils
• Crude oil and fuel oil
• Paint, resins, emulsions and coatings
• Soap and detergents
• Food process plants
• Heat transfer