Pump Type - Submersible
Max Flow Rate - 258M³H
Max Head - 31M
Pump Materials - Cast Iron
Max Temp - 40°C
Max Viscosity - 200 cst
Max Solid Passage - 30mm
Self Priming - N
Inlet/Outlet Sizes - 80mm to 200mm
Drive - AC Electric
Max Suction Lift - 0
Tsurumi has a huge range of submersible pumps, with more than 25 different pump types, this submersible pump specialist has a pump for almost any application, from light domestic usage to heavy duty industrial applications, model dependant Tsurumi submersible pumps can be supplied either free standing or with a guide rail system consequently suitable for fixed or mobile applications, must pump models can be supplied with optional float-switch.
Models available in both single and 3 phase supply, upon request 60 Hz pumps are also available.
Our Tsurumi submersible pumps are available with a variety of impeller types to suit a number of applications and fluids from domestic clean water distribution to industrial sewage, sludge and slurry transfer, depending on the model specified these submersible pumps can handle a max. liquid temperature of 40°C and has a max. solids passage of 100mm.
Tsurumi submersible pumps are available with a variety of different impeller types, sealing options and construction materials.
The Tsurumi KRS2 pump range is a heavy duty submersible pump supplied with 4 pole motors for increased wear resistance and integrated chromium iron agitators, these construction feature is quite useful when handling large concentrations of solids as it's specifically designed for keeping solids in suspension and as a result maintaining the pump's inlet unclogged and therefore avoiding impeller blockage.
The KRS2 pump range is supplied with grey cast iron pump casing, dual hard face mechanical seal (silicon carbide – silicon carbide) and chromium iron impeller.
Available in 400V 3 phase supply only.
IDS - (Individual screened cable) available at extra cost – (For quarry and mining applications)
• Supplied with built-in agitator in chromium iron for blockage prevention
• 4 pole motors for major wear resistance
• Chromium iron impeller
• IDS - (Individual screened cable) available upon request
• Double mechanical seal - silicon carbide – silicon carbide
• 30mm max. Solids passage
• Liquid temperature up to 40°C
• Supplied with dual hard face mechanical seal - in oil bath/chamber
• Compact design and robust construction
• 60Hz frequency also available upon request
• Construction sites
• Drainage / dewatering
• Concrete mixing plants
• Mining / drilling