Go BackGo back
Product code: PG Flow Solutions Spare Parts

PG Flow Solutions Spare Parts

DOWNLOADS

DESCRIPTION

PG Flow Solutions Spare Parts


Formed in 1982, PG Flow Solutions has since 
been known by many names, including; PG Flow Solutions AS and Ing. Per Gjerdrum AS


They are a manufacturer of various fluid-related products, such as ballast water treatment systems and pumps. Their main pump types, including; centrifugal, side channel and multistage.  


They have grown to be a worldwide supplier of fluid handling equipment into various markets, including; marine, oil and gas, energy plants and many more.


North Ridge Pumps have a great deal of experience supplying original spare parts for Ing. Per Gjerdrum AS pumps and supplying exact original replacement pumps.

 

Below are some of the common models we supply spare parts for. 


Contact us with any PG Flow related enquiries. 


PG 100-250 A1 

PG 2-6 

PG 32/125 A1 

PG 32/160 A 

PG 32/200 A1, 

PG 40/125-A1/W 

PG 40-250 A1 

PG 50/125 A1 

PG 50/125 A1 

PG 50/125 AL 

PG 50/250 A1 

PG 50/250 A1 

PG 65/200 A1 


FAQS

We supply all parts associated with PG Flow pumps, these include; impellers, shafts, mechanical seals, casings, o-rings and gaskets. Any parts labelled on the drawing and parts list are available for purchase, either individually or as part of a kit.
The pump needs to be disassembled and inspected as part of a maintenance program to correctly identify any damaged parts. The drawing and parts list then need to be viewed to find the correct part description and position number.
The basic information required to obtain a quotation includes; the pump model number, serial number if available, description or name of the part and the position number of the part if available. This information allows us to correctly identify the parts required and to identify the correct materials.
Premature pump failure can be an indication of system problems or incorrect pump selection. Common causes of premature pump failure include; incompatibility of the pump materials with the fluid, incorrect pipework size, incorrect type of pump and incorrect size of pump. We can help identify the cause of your pump failure if you provide the following information; description of the application, fluid being pumped, viscosity, temperature, flow rate required, pressure required, inlet conditions and bore of pipework.
This depends on several factors; how frequently are spare parts required? how long has the pump been in operation? and the price of the required spare parts versus the cost of a complete new pump. For example, if a new casing, impeller, shaft and mechanical seal are required, then it is more cost effective to purchase a complete new pump as a large proportion of the high value parts are required. If the pump is wearing frequently and prematurely, then this may be an indication that the wrong type or size of pump is installed. It is a good idea to talk to us in this situation as we may be able to identify the issue with your pump or system and select a more suitable pump for your requirements.
Yes, we can help. We can select an alternative type, size or brand of pump if you provide the following information; description of the application, fluid being pumped, viscosity, temperature, flow rate required, pressure required, inlet conditions and bore of pipework. Using a different type or size of pump that is more suited to your application could help reduce your running and maintenance costs.